|
|
Remote training station
Kučera, Tomáš ; Jirgl, Miroslav (referee) ; Štohl, Radek (advisor)
The purpose of the thesis is design and contruction of remote training station for training with Schneider Electric products. Its purpose is to introduce company PLCs, familirize user with configuring variable speed drives and servo drives and prezenting Machine Advisor and EcoStruxure Augmented Operator Advisor online servives The begining is dedicated to introduction to company and a range of its products in the field of industrial automation. In second chapter, I select components for building training station. Third chapter is dedicated to assembly of station. In fourth chaper I describe programing of individual elements and example.
|
|
|
Energetic model of linear axis with ball screw and servodrive
Sládek, Vojtěch ; Tůma, Jiří (referee) ; Huzlík, Rostislav (advisor)
The aim of the thesis was to study the Energy Models of Linear Axes with Ball Screws and Servo Drives, to analyze the individual parts of the axis with respect to losses, the methodology of calculating the losses on the electrical part and the mechanical part of the drive and creating a complex algorithm that calculates the energy consumed for the specified motion. The thesis is divided into a theoretical and practical part, where the theoretical part is divided into the treatise on the electrical part of the axis and its losses and the part that deals with the mechanical part and its losses. The calculation is divided into the basic verification algorithm and the calculation on the given example. Each calculation is calculated for both linear acceleration and S-curve acceleration. For both types of acceleration, the result of energy and its course over time is also the waveforms of position, velocity, acceleration, angular acceleration, moments, powers, power, speed and currents over time.
|
|
|
Power supply module for servo-drive
Kudláček, Pavel ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
The aim of the diploma thesis is to theoretically design and to put the mains power supply module for two-axis servo amplifier TZG 560 with the total power 28kW for the company TG Drives into practice. The analytical design of the power part with the braking circuit, the calculation of power components’ heat balance, EMI filter design and realization of measuring, controlling and indication circuits are described in the thesis. In addition, the mechanical device construction, structure of the controlling program and the results obtained in the verification process of the module functionality are presented.
|
|
|
Engineering design of conveyor
Chmelík, Jiří ; Čípek, Pavel (referee) ; Foltýnová, Dana (advisor)
The bachelor thesis deals with the design of a conveyor for transporting welded beams with variable dimensions. At the beginning of the work are listed some conveyors, which are commonly used in practice. Following analysis of available design solutions, design designs of equipment, their description and based on comparison was chosen the most suitable design solution. In the course of work is performed safety analysis of selected nodes. At the end of the work is evaluated the whole construction and elaborated the drawing documentation of the device. The proposed solution can also be used to transport parts of similar shapes.
|
|
| |
|
|
Using brushless d.c. motor to drive servo-unit with safety function
Rudolf, Ladislav ; Mišurec, Jiří (referee) ; Prajzner, Václav (advisor)
In this work, a proposal for BLDC motor control, which will be used as a drive linear actuator. Control with microcontroller focuses mainly aspects such as motor mode, regenerative mode, measuring rotor position sensors and measuring the motor current, which corresponds to the moment. The result of the work is focused on upgrading the existing Honeywell actuator, where the processor-controlled BLDC motor to replace the existing system and take over the actuator working function and emergency function.
|
|
|
PLC controlled system for manipulated arm
Slavík, Miroslav ; Zemánek, Pavel (referee) ; Pásek, Jan (advisor)
In this bachelor´s thesis is solved automatic task of PLC controled manipulated arm. For this controled is used Siemens Simatic 200 with programing enviroment MicroWin. The servos are moving with parts of arm. The servos are conected to the PLC trought PCB of electronics interface. PCB is created specially for this aim. Design of PCB is described. Details description is PLC´s program. Comunication between PLC and SCADA is trought a PPI cable. Vizualition of proces is runing on the ControlWeb by Moravians instrument, this is descripted also. To the Manipulated arm is instaled conveyor. Boxes are transporting by conveyor. Pyramid is build from boxes.
|
|
|
Control of special purpose machine tool
Plocek, Jaroslav ; Holub, Michal (referee) ; Houška, Pavel (advisor)
The master thesis treats the design of control system of special purpose machine tool. The first part analyzes and compares two possible variants of control system which use either a CNC control system Sinumerik or motion control system Simotion. Only the variant with the Simotion control system is subsequently examined in detail: its hardware configuration, the selection of components and partly also the software solution. The thesis further deals with the safety of the realized control system and of the whole machine. There are described general safety requirements of machinery based on harmonized European standards and their specific application in the design of safety functions and the safety circuits of solved machine tool.
|
|
|
Position control of cross-table dedicated manufacturing machine
Plocek, Jaroslav ; Vetiška, Jan (referee) ; Houška, Pavel (advisor)
The bachelor thesis treats the drive solution of the two axis cross-table of a single-purpose manufacturing machine. The first chapter analyzes the concept of drives and compares different variants using either a direct linear drive or a ball screw with a rotary servo drive. The thesis further deals with sizing the motor and the power unit assembly and the description of the whole measuring system. The structure of cascading position controller, its description and the calculation of current and speed control loops is covered in the next part. The last section discusses practical settings of all control parameters.
|
|
|
Design of linear ball screw actuator for higher axial load
Turek, Lukáš ; Klapka, Milan (referee) ; Koutný, Daniel (advisor)
This bachelor thesis solves the construction of a servomotor with a moving screw for higher axial loads. The aim was to design a servo actuator for an axial load of 25 kN, which can be clamped from both sides. The partial goals were to develop an overview of electro-mechanical servo actuators, to analyze the force ratios, load capacity and service life of the current actuator solution. Further process the calculation and design of the actuator, including drawing documentation of selected components for higher axial loads.
|
guest ::
